Sterile kits
Area-based procedure kit
Area-based kit that brings mops, wipes and task accessories into one procedure set.
1 / 2
Cleanroom wipes
Cleanroom wipe
See the complete configuration.
Wipe for cleanroom surfaces, assessed for dry use or wet use with a chemical.
- Product family
- Cleanroom wipes
- Layers
- Confirmed at the sample and quotation stage
- Dimensions
- Confirmed at the sample and quotation stage
- Basis weight
- Confirmed at the sample and quotation stage
- Material
- Confirmed at the sample and quotation stage
- Attachment
- Confirmed at the sample and quotation stage
Selected variant: Dry use · OW-03-KURU
Values apply only to the stated configuration and scope.
Overview
Cleanroom wipe for dry use or wet use with a chemical, used on equipment and sensitive surfaces with a fresh fold for each new surface. Fibre/particle and NVR results are published with the SKU, the test method and the dry/wet condition. Chemical compatibility is confirmed separately per chemical, concentration, contact time and temperature.
Confirmed at the sample and quotation stage
- Size, material and edge construction
- Fibre/particle, NVR and ionic residue results
- Chemical compatibility and sterile status
Technical specifications
Values apply only to the stated configuration and scope.
Product family / Configuration dossier
Layer count alone is not enough.
Consider dimensions, basis weight, material structure and edge / attachment details together.
| Property | Condition | Evidence |
|---|---|---|
| AbsorptionTest conditions for liquid uptake and retention. | Confirmed at the sample and quotation stage | Awaiting report |
| Particles and fibresAssessment of release behaviour by method and sample. | ||
| NVR and ionsScope of non-volatile residue and ion measurements. | ||
| TransferTask and method context for transfer between surfaces. | ||
| Chemical compatibilityAgent, concentration, contact time and temperature. |
Variants
| Mode of use | SKU |
|---|---|
| Dry use | OW-03-KURU |
| Wet use (with a chemical) | OW-03-ISLAK |
Use and care
From conditions to a sample
- 01
Conditions
Share the environment, surface, risk, chemistry and use cycle; leave unknowns open.
- 02
Pre-selection
The team prepares a pre-selection of product, layers and presentation; it is not a site validation.
- 03
Sample and file
A sample and the product's technical file are discussed for your own evaluation.
Request
Technical dossier consultation
Prepare your request line
Choose the variant, quantity and your preferences; the contact page adds them to the meeting summary. You review and send the request there.
We clarify these options together in the technical consultation.
Evidence
Read a result with its sample.
When method, sample or test conditions change, the scope of results is reassessed.
Review the evidence dossier structureEvidence dossier structure
- Method
- Which question is being addressed, using which method.
- Sample
- Identity of the product and configuration under review.
- Condition
- The environment and parameters of the test.
- Revision
- Document version and applicable scope.
No report is currently approved for publication.
Method
Which question is being addressed, using which method.
Sample
Identity of the product and configuration under review.
Condition
The environment and parameters of the test.
Revision
Document version and applicable scope.
See also
Absorbent pads
Spill control pad
Absorbent pad for liquid and chemical spill control, with single-use and reusable options.
Entry and particle control (planned)
Entry and transfer area textile (planned)
Planned product line for particle control in entry and transfer areas, to be assessed in a site pilot.
Mop systems
OWMO BIO single-use mop
Single-use mop for short tasks, assessed in 2, 3, 4 and 5-layer constructions.